• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are a great option for modern homes. They are durable, long-lasting and easy to maintain. Unlike timber and aluminium, they are not susceptible to get rusty or decay.

It is crucial to wash and oil UPVC doors and windows on a regular basis. This will help avoid unnecessary repair costs and improve energy efficiency.

1. Broken Glass

If the glass in your window has been damaged, it can cause a great deal of damage to your home, making it very hazardous and possibly fatal. It is crucial to take the time to ensure that you're doing everything you can to ensure that your windows are in good repair.

For single pane windows, it can be relatively simple to replace them, and the replacement will usually fit inside the frame that was previously installed easily. If windows with double panes are held together by internal beading, it will be more difficult to remove and replace the old panes. In this instance, it is necessary to purchase plastic spacers in order to help the new pane fit into the window frame.

Wearing eye protection and thick gloves is essential for anyone who plans to remove the glass yourself. It is also a good idea to lay down a drop cloth prior to when you begin working on the glass to ensure that any shards fall onto the cloth instead of onto the floor where they could be trodden under and cause further damage.

It's a great idea to cover the gap with tape after the glass is removed. This will prevent drafts and water from entering your property until a professional arrives to fix the window. It also acts as a barrier, deterring any intruders to gain access to your home. If the gap is large, you may be interested in an alarm door that comes with an integrated window, as it will provide the best of both worlds.

2. Sagging

Upvc windows and doors are a cost-effective energy efficient, durable and long-lasting alternative to timber windows with sash. In time, they could develop a variety of issues, including sagging. A window that isn't properly aligned can cause problems with light, draughts or even security. It's crucial to act as soon as you notice your uPVC windows are sliding.

To fix a window that is sagging you can try repositioning the hinges. You'll first need to open the windows to get at the frame. You can then unscrew both the hinges on the top and bottom using a screwdriver and adjust the hinges clockwise or counter-clockwise. Close your window to test the fit after you've relocated your hinges. If you're satisfied with the fit, you can tighten the screws until they remain in the right place.

If you are unable to reposition the hinges, you might need to replace the seal. Over time, rubber seals lose their elasticity and dry out, which causes them to lose tightness. If this happens, it's crucial to replace the seal as quickly as possible to ensure your uPVC windows are watertight and secure from draughts.

uPVC handles can also become loose. This is often caused by screws that have loosened over time, but it can be caused by the handle mechanism getting worn out. It's a good thing that it's simple to fix a loose uPVC window handle yourself. First, you'll need to close the window and then perform a test fit. The corner joints of the sash should be aligned with the casing joint. If it doesn't then you can use a screwdriver or a wrench to loosen the handle and return the mechanism to its original the position it was in.

3. Water Leaks

If you awake to wet floors and mouldy walls each time it rains, it's crucial to take action. Water leaks through windows can cause structural damage to your home and also affect your ability to regulate the temperature inside your home. Most often, uPVC window leaks are caused by a damaged or missing sealant.

It is a fairly easy fix that can be completed by any skilled DIYer. Depending on the severity of the issue the caulking used previously may need to be removed before a new layer of caulk is applied. It is important to remember that when it is about uPVC window repairs, you should not be tempted to apply too much caulk and then make the area harder to clean and can reduce your energy efficiency.

It is important to check that the drainage holes are free of debris and that the sill pan is placed in a way that allows it to drain away from the window. In more serious cases you might need to consider replacing the window.

Mold spots and rotten sills are also signs of water leakage. This mold thrives in damp environments and is able to quickly spread throughout the home.

It is also important to note that if the leakage originates from the glass of your double-glazed windows it may be more likely to be an issue with the glass seal, rather than the frame or sliding. It is also possible to be corrected by a uPVC window specialist who will replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or are loose and blow open with a breeze it could be hinges at the fault. Any competent DIYer can replace these in a matter of minutes.

Almost every household in the UK will have top-hung or side-hung uPVC windows that use hinges and, just like any mechanical component they are susceptible to wear and tear over time. It's very simple to replace a hinge on a window however it is easier if someone else helps hold the frame.

It is also important to ensure that the uPVC hinges are being opened and closed in the right direction. Check for the arrows on each hinge to determine which way the window should be opened.

The issue can be caused either due to opening the window in the wrong way or due to a poor installation in the factory. Sending us a picture via our website will often resolve the problem. We are always happy to offer assistance.

It is also crucial to lubricate the hinges regularly. This can be accomplished by applying an oil that is light in nature to the hinges. We recommend using a solvent-free lubricant, such as the 3-in-one Multi-Purpose oil. Regular lubrication can make the window easier to open and close. It can also lower the possibility of a window getting stuck and stop corrosion. This should be done at least every year. WD40 and other solvent based fluids are not recommended since they could damage parts of your uPVC window.

5. Draughts

Draughts can be caused by several different factors. Firstly the hinges, again due to wear and tear could become misaligned. This can cause gaps to develop between the sash and the frame. If they're beyond repair, it might be required to realign them. In addition, the interlock could be unbalanced. It is located on the hinge's side, and may need to be cleaned. In certain instances it might be necessary to replace them.

These seals can wear down or be damaged over time, allowing air escape. This can be prevented by replacing them with high-quality weatherstripping. Replace the windows made of Upvc window repair with low-emissivity glass. This will help to regulate indoor temperatures and lessen the risk of draughts.

Another method of reducing the amount of draughts is to use a Draught-exclusion device. These are usually made of fabric tubes filled with a filler which can be hung over your window sill. These will help to keep cold air out and keep your home warm and cosy!

Your upvc windows can keep providing excellent insulation and security for your home with a little regular maintenance and repairs. However, it is important to recognize that windows last for a certain period of time and eventually, they will reach a point where it is more efficient to replace them than repair them. So, if you are having issues with your upvc windows, it is always best to seek professional assistance as soon as you can.